Home Cost Decoder

Home › Doors and windows › French Door Installation Cost › Ohio

Ohio · 2026 estimate

French Door Installation Cost in Ohio

An exterior French (hinged patio) door set, prehung, installed in an existing opening with trim and haul-away.

  • $4,569typical total
  • $2,639–$8,454range for this scope
  • $102/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $102/hour for a worker paid the Ohio median of $29.24/hour.

Estimated installed cost in Ohio
$4,569
Typical estimate. Range $2,639 to $8,454 for this scope.
Line itemLowTypicalHigh
Prehung French door set$2,000$3,200$5,500
Installer labor (8.0 h at $102/h)$439$819$1,754
Sill pan, flashing, trim, caulk, paint$150$300$600
Remove and haul away old door$50$100$200
Permit (where required)$0$150$400
Total$2,639$4,569$8,454

French door labor costs in Ohio

Labor is priced from what Ohio tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job about the same as the national typical of $4,565. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)Ohio medianU.S. medianBilled at 3.5×
Carpenters$29.24$29.12$102/h

What drives the price

What people were actually quoted in Ohio

Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$11,000quoteTwo ProVia fiberglass exterior French door sets, 60×80 and 72×80 in, fully installednortheast Ohiothread
around $12,000quoteAlternative contractor for same two-set ProVia French-door projectnortheast Ohiothread
around $13,000quoteAnother contractor for same two-set ProVia French-door projectnortheast Ohiothread
$10,000quoteTwo installed steel French-door sets, lower-cost alternative to fiberglassnortheast Ohiothread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the Ohio median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does french door installation cost in Ohio?

For the default job below, about $4,569 in Ohio, with a range of $2,639 to $8,454 depending on equipment, access and the contractor. That is about the same as the national typical of $4,565, because Ohio trade wages differ from the national median. Change the inputs to match your job.

Are French doors more expensive than sliding doors?

Comparable quality is usually in the same range. French doors need room to swing open and often have more weatherstripping to fit; sliders save floor space.

Related calculators

More: Water softener · Gutters · Gutter guards · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · Mini split · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · All Ohio costs

French door cost in other states

Sources