Home Cost Decoder

Home › Plumbing › Bathtub Installation Cost › District of Columbia

District of Columbia · 2026 estimate

Bathtub Installation Cost in District of Columbia

Replacing a standard alcove bathtub: tear-out, the new tub and drain, the walls around it, and plumbing.

  • $4,690typical total
  • $2,217–$10,601range for this scope
  • $83/hlaborer rate
Labor rate and area

Default 3.5×: a contractor bills about $83/hour for a worker paid the District of Columbia median of $24.05/hour.

Estimated installed cost in District of Columbia
$4,690
Typical estimate. Range $2,217 to $10,601 for this scope.
Line itemLowTypicalHigh
Tear-out of the old tub (4.0 h at $83/h)$179$333$834
Debris disposal$100$200$350
New tub$300$600$1,500
Drain, overflow and supply parts$50$120$250
Plumber labor: set tub and connect drain (6.0 h at $170/h)$486$1,020$2,186
Carpentry: ledger, framing and floor prep (3.0 h at $104/h)$148$312$742
Acrylic tub surround$300$600$1,200
Surround installation (4.0 h at $104/h)$223$415$890
Valve, spout and trim$150$300$700
Plumber labor: valve (2.0 h at $170/h)$182$340$850
Drywall patch and paint$100$300$700
Permit (where required)$0$150$400
Total$2,217$4,690$10,601

Bathtub labor costs in District of Columbia

Labor is priced from what District of Columbia tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 13% above the national typical of $4,156. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)District of Columbia medianU.S. medianBilled at 3.5×
Construction laborers and helpers$24.05$22.66$83/h
Plumbers, pipefitters and steamfitters$48.57$30.67$170/h
Carpenters$29.67$29.12$104/h

What drives the price

No District of Columbia price reports in our Reddit sample yet. See 6 reports from other places.

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the District of Columbia median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does bathtub installation cost in District of Columbia?

For the default job below, about $4,690 in District of Columbia, with a range of $2,217 to $10,601 depending on equipment, access and the contractor. That is 13% above the national typical of $4,156, because District of Columbia trade wages differ from the national median. Change the inputs to match your job.

Can a bathtub be replaced without removing tile?

Sometimes. Removing an alcove tub usually damages the bottom rows of tile, so most installers either replace the surround or patch the lowest course. Ask how the quote handles the walls.

How much does it cost to convert a tub to a shower?

Usually more than a like-for-like tub swap, because the drain often moves and the floor and walls need new waterproofing. Price it with the shower calculator, then add plumber hours for moving the drain.

Related calculators

More: Garage door · Garage door opener · Gutters · Gutter guards · 240V outlet · Recessed lighting · French door · Sliding glass door · Exterior door · Mini split · Egress window · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · Skylight · All District of Columbia costs

Bathtub cost in other states

Sources