Home Cost Decoder

Home › Plumbing › Bathtub Installation Cost › North Carolina

North Carolina · 2026 estimate

Bathtub Installation Cost in North Carolina

Replacing a standard alcove bathtub: tear-out, the new tub and drain, the walls around it, and plumbing.

  • $3,915typical total
  • $1,832–$8,859range for this scope
  • $75/hlaborer rate
Labor rate and area

Default 3.5×: a contractor bills about $75/hour for a worker paid the North Carolina median of $21.50/hour.

Estimated installed cost in North Carolina
$3,915
Typical estimate. Range $1,832 to $8,859 for this scope.
Line itemLowTypicalHigh
Tear-out of the old tub (4.0 h at $75/h)$160$298$745
Debris disposal$100$200$350
New tub$300$600$1,500
Drain, overflow and supply parts$50$120$250
Plumber labor: set tub and connect drain (6.0 h at $96/h)$274$576$1,235
Carpentry: ledger, framing and floor prep (3.0 h at $83/h)$118$248$590
Acrylic tub surround$300$600$1,200
Surround installation (4.0 h at $83/h)$177$331$708
Valve, spout and trim$150$300$700
Plumber labor: valve (2.0 h at $96/h)$103$192$480
Drywall patch and paint$100$300$700
Permit (where required)$0$150$400
Total$1,832$3,915$8,859

Bathtub labor costs in North Carolina

Labor is priced from what North Carolina tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 6% below the national typical of $4,156. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)North Carolina medianU.S. medianBilled at 3.5×
Construction laborers and helpers$21.50$22.66$75/h
Plumbers, pipefitters and steamfitters$27.44$30.67$96/h
Carpenters$23.61$29.12$83/h

What drives the price

No North Carolina price reports in our Reddit sample yet. See 6 reports from other places.

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the North Carolina median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does bathtub installation cost in North Carolina?

For the default job below, about $3,915 in North Carolina, with a range of $1,832 to $8,859 depending on equipment, access and the contractor. That is 6% below the national typical of $4,156, because North Carolina trade wages differ from the national median. Change the inputs to match your job.

Can a bathtub be replaced without removing tile?

Sometimes. Removing an alcove tub usually damages the bottom rows of tile, so most installers either replace the surround or patch the lowest course. Ask how the quote handles the walls.

How much does it cost to convert a tub to a shower?

Usually more than a like-for-like tub swap, because the drain often moves and the floor and walls need new waterproofing. Price it with the shower calculator, then add plumber hours for moving the drain.

Related calculators

More: Garage door · Garage door opener · Gutters · Gutter guards · 240V outlet · Recessed lighting · French door · Sliding glass door · Exterior door · Mini split · Egress window · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · Skylight · All North Carolina costs

Bathtub cost in other states

Sources