| Line item | Low | Typical | High |
|---|---|---|---|
| Gutter material, hangers, end caps, sealant | $375 | $525 | $750 |
| Downspouts, elbows and outlets | $180 | $260 | $440 |
| Installer labor (crew hours) (12.5 h at $82/h) | $560 | $1,031 | $2,003 |
| Remove and haul away old gutters | $75 | $150 | $263 |
| Fascia repair allowance (if rot is found) | $0 | $0 | $600 |
| Total | $1,190 | $1,966 | $4,055 |
Gutters labor costs in North Carolina
Labor is priced from what North Carolina tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 6% below the national typical of $2,101. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.
| Trade (BLS) | North Carolina median | U.S. median | Billed at 3.5× |
|---|---|---|---|
| Roofers | $23.56 | $26.65 | $82/h |
What drives the price
- Linear feet and number of downspouts
- Material: aluminum is the norm; steel and especially copper cost much more
- Two-story and steep roofs need more setup and safety work
- Rotten fascia boards found when old gutters come off
- 6-inch gutters and oversize downspouts for big or steep roofs
What people were actually quoted in North Carolina
Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.
| Price | Type | What was included | Where | |
|---|---|---|---|---|
| $8,687 | quote | Company 1 total: 6-inch gutters, kickout flashing, drip edge, 80 ft fascia replacement; after tax | central North Carolina | thread |
| $13,995 | quote | Company 2 total: gutters, Raindrop guards, fascia and fascia guard service; after tax | central North Carolina | thread |
| $5,158 | quote | Company 3 total: new gutters, flashing/ice-water shield and up to 70 ft fascia repair | central North Carolina | thread |
| $4,200 | quote | Company 1 gutter and three kickout-flashing line item only | central North Carolina | thread |
| $5,945 | quote | Company 2 gutter line item only; guards and fascia separately quoted | central North Carolina | thread |
How this estimate is built
Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the North Carolina median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.
Questions
How much does gutters installation cost in North Carolina?
For the default job below, about $1,966 in North Carolina, with a range of $1,190 to $4,055 depending on equipment, access and the contractor. That is 6% below the national typical of $2,101, because North Carolina trade wages differ from the national median. Change the inputs to match your job.
How do I measure gutter length?
Measure each roof edge (eave) that needs a gutter and add them up. A typical single-story house has 120 to 200 feet. Count one downspout for roughly every 30 to 40 feet of gutter.
Are seamless gutters worth it?
Seamless aluminum gutters are formed on site to the exact length, so there are joints only at corners. They leak less than sectional gutters and are the standard choice for installed gutters.
Related calculators
- Gutter guardstypical $1,334
- Metal rooftypical $31,426
- Vinyl sidingtypical $17,567
- Hardie (fiber cement) sidingtypical $28,669
- Paver patiotypical $5,780
More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All North Carolina costs
Gutters cost in other states
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- District of Columbia
- Florida
- Georgia
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming