Home Cost Decoder

Home › Doors and windows › Egress Window Installation Cost › North Carolina

North Carolina · 2026 estimate

Egress Window Installation Cost in North Carolina

A code-size basement egress window: digging out, cutting the foundation, the window, a well and ladder, and drainage.

  • $6,105typical total
  • $3,280–$11,633range for this scope
  • $75/hlaborer rate
Labor rate and area

Default 3.5×: a contractor bills about $75/hour for a worker paid the North Carolina median of $21.50/hour.

Estimated installed cost in North Carolina
$6,105
Typical estimate. Range $3,280 to $11,633 for this scope.
Line itemLowTypicalHigh
Excavator or digging equipment$300$500$900
Excavation and backfill labor (12.0 h at $75/h)$426$894$1,916
Concrete cutting (specialist)$1,200$1,800$2,800
Egress window (casement or slider)$300$500$900
Steel window well, ladder and cover$450$800$1,400
Gravel, drain tie-in, waterproofing$150$350$900
Window installation and framing (8.0 h at $83/h)$354$661$1,417
Interior trim and wall finishing$0$300$800
Permit$100$300$600
Total$3,280$6,105$11,633

Egress window labor costs in North Carolina

Labor is priced from what North Carolina tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 3% below the national typical of $6,308. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)North Carolina medianU.S. medianBilled at 3.5×
Construction laborers and helpers$21.50$22.66$75/h
Carpenters$23.61$29.12$83/h

What drives the price

No North Carolina price reports in our Reddit sample yet. See 7 reports from other places.

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the North Carolina median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does egress window installation cost in North Carolina?

For the default job below, about $6,105 in North Carolina, with a range of $3,280 to $11,633 depending on equipment, access and the contractor. That is 3% below the national typical of $6,308, because North Carolina trade wages differ from the national median. Change the inputs to match your job.

What size does an egress window have to be?

Under the International Residential Code most localities use, a basement bedroom needs an opening of at least 5.7 sq ft (5.0 sq ft at grade level), at least 24 inches high and 20 inches wide, with a sill no more than 44 inches above the floor. Check your local code.

Do I need a permit for an egress window?

Almost always, because the foundation is cut and the window is a life-safety exit. The permit is usually a few hundred dollars.

Related calculators

More: Water softener · Gutters · Gutter guards · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · Mini split · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · All North Carolina costs

Egress window cost in other states

Sources