Home Cost Decoder

Home › Doors and windows › Egress Window Installation Cost › North Dakota

North Dakota · 2026 estimate

Egress Window Installation Cost in North Dakota

A code-size basement egress window: digging out, cutting the foundation, the window, a well and ladder, and drainage.

  • $6,310typical total
  • $3,385–$12,072range for this scope
  • $82/hlaborer rate
Labor rate and area

Default 3.5×: a contractor bills about $82/hour for a worker paid the North Dakota median of $23.59/hour.

Estimated installed cost in North Dakota
$6,310
Typical estimate. Range $3,385 to $12,072 for this scope.
Line itemLowTypicalHigh
Excavator or digging equipment$300$500$900
Excavation and backfill labor (12.0 h at $82/h)$467$981$2,102
Concrete cutting (specialist)$1,200$1,800$2,800
Egress window (casement or slider)$300$500$900
Steel window well, ladder and cover$450$800$1,400
Gravel, drain tie-in, waterproofing$150$350$900
Window installation and framing (8.0 h at $97/h)$417$779$1,670
Interior trim and wall finishing$0$300$800
Permit$100$300$600
Total$3,385$6,310$12,072

Egress window labor costs in North Dakota

Labor is priced from what North Dakota tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job about the same as the national typical of $6,308. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)North Dakota medianU.S. medianBilled at 3.5×
Construction laborers and helpers$23.59$22.66$82/h
Carpenters$27.83$29.12$97/h

What drives the price

No North Dakota price reports in our Reddit sample yet. See 7 reports from other places.

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the North Dakota median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does egress window installation cost in North Dakota?

For the default job below, about $6,310 in North Dakota, with a range of $3,385 to $12,072 depending on equipment, access and the contractor. That is about the same as the national typical of $6,308, because North Dakota trade wages differ from the national median. Change the inputs to match your job.

What size does an egress window have to be?

Under the International Residential Code most localities use, a basement bedroom needs an opening of at least 5.7 sq ft (5.0 sq ft at grade level), at least 24 inches high and 20 inches wide, with a sill no more than 44 inches above the floor. Check your local code.

Do I need a permit for an egress window?

Almost always, because the foundation is cut and the window is a life-safety exit. The permit is usually a few hundred dollars.

Related calculators

More: Water softener · Gutters · Gutter guards · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · Mini split · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · All North Dakota costs

Egress window cost in other states

Sources