| Line item | Low | Typical | High |
|---|---|---|---|
| Metal panels | $9,000 | $13,000 | $18,000 |
| Underlayment, trim, flashing, fasteners | $1,600 | $2,400 | $3,600 |
| Roofer labor (crew hours) (140.0 h at $79/h) | $5,642 | $11,059 | $22,570 |
| Tear-off labor (40.0 h at $65/h) | $1,392 | $2,598 | $5,567 |
| Dumpster and disposal | $500 | $800 | $1,200 |
| Decking repair allowance | $0 | $300 | $1,200 |
| Permit | $150 | $400 | $900 |
| Total | $18,284 | $30,557 | $53,037 |
Metal roof labor costs in Georgia
Labor is priced from what Georgia tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 8% below the national typical of $33,100. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.
| Trade (BLS) | Georgia median | U.S. median | Billed at 3.5× |
|---|---|---|---|
| Roofers | $22.57 | $26.65 | $79/h |
| Construction laborers and helpers | $18.74 | $22.66 | $65/h |
What drives the price
- Standing seam vs. exposed-fastener panels
- Roof area, pitch and complexity (valleys, dormers, skylights)
- Tearing off the old roof vs. going over it (where allowed)
- Rotten decking found during tear-off
- Panel gauge and finish (Kynar paint costs more)
No Georgia price reports in our Reddit sample yet. See 6 reports from other places.
How this estimate is built
Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the Georgia median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.
Questions
How much does metal roof installation cost in Georgia?
For the default job below, about $30,557 in Georgia, with a range of $18,284 to $53,037 depending on equipment, access and the contractor. That is 8% below the national typical of $33,100, because Georgia trade wages differ from the national median. Change the inputs to match your job.
How do I measure my roof in squares?
A square is 100 sq ft of roof surface. Roof area is larger than the house footprint: multiply the footprint (including overhangs) by about 1.1 for a low pitch or 1.2–1.4 for a steep one, then divide by 100.
Is a metal roof worth the cost over shingles?
Metal often lasts 40+ years against 20–30 for asphalt shingles and sheds snow and wind better, but costs roughly two to three times as much up front.
Related calculators
- Gutterstypical $1,922
- Gutter guardstypical $1,318
- Vinyl sidingtypical $17,294
- Hardie (fiber cement) sidingtypical $28,418
- Paver patiotypical $5,378
More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All Georgia costs
Metal roof cost in other states
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- District of Columbia
- Florida
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming