Home Cost Decoder

Home › Roofing and exterior › Metal Roof Installation Cost › New York

New York · 2026 estimate

Metal Roof Installation Cost in New York

A metal roof priced by roof area: panels, underlayment and trim, roofer labor, and tear-off of the old roof.

  • $36,181typical total
  • $21,182–$64,629range for this scope
  • $111/hroofer rate
Labor rate and area

Default 3.5×: a contractor bills about $111/hour for a worker paid the New York median of $31.74/hour.

Estimated installed cost in New York
$36,181
Typical estimate. Range $21,182 to $64,629 for this scope.
Line itemLowTypicalHigh
Metal panels$9,000$13,000$18,000
Underlayment, trim, flashing, fasteners$1,600$2,400$3,600
Roofer labor (crew hours) (140.0 h at $111/h)$7,935$15,553$31,740
Tear-off labor (40.0 h at $93/h)$1,997$3,728$7,989
Dumpster and disposal$500$800$1,200
Decking repair allowance$0$300$1,200
Permit$150$400$900
Total$21,182$36,181$64,629

Metal roof labor costs in New York

Labor is priced from what New York tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 9% above the national typical of $33,100. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)New York medianU.S. medianBilled at 3.5×
Roofers$31.74$26.65$111/h
Construction laborers and helpers$26.89$22.66$93/h

What drives the price

What people were actually quoted in New York

Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$8,000quoteMetal roof stated to be same quote as asphalt; two-story 2,000 sq ft houseupstate New Yorkthread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the New York median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does metal roof installation cost in New York?

For the default job below, about $36,181 in New York, with a range of $21,182 to $64,629 depending on equipment, access and the contractor. That is 9% above the national typical of $33,100, because New York trade wages differ from the national median. Change the inputs to match your job.

How do I measure my roof in squares?

A square is 100 sq ft of roof surface. Roof area is larger than the house footprint: multiply the footprint (including overhangs) by about 1.1 for a low pitch or 1.2–1.4 for a steep one, then divide by 100.

Is a metal roof worth the cost over shingles?

Metal often lasts 40+ years against 20–30 for asphalt shingles and sheds snow and wind better, but costs roughly two to three times as much up front.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All New York costs

Metal roof cost in other states

Sources