Home Cost Decoder

Home › Roofing and exterior › Vinyl Siding Installation Cost › Texas

Texas · 2026 estimate

Vinyl Siding Installation Cost in Texas

Vinyl siding priced by wall area: siding and trim, house wrap, installation, and removal of the old siding.

  • $17,311typical total
  • $8,803–$33,601range for this scope
  • $82/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $82/hour for a worker paid the Texas median of $23.51/hour.

Estimated installed cost in Texas
$17,311
Typical estimate. Range $8,803 to $33,601 for this scope.
Line itemLowTypicalHigh
Vinyl siding, J-channel, corners, starter$2,700$4,050$5,850
House wrap, fasteners, sealant$450$720$1,080
Installer labor (crew hours) (97.2 h at $82/h)$3,808$7,998$15,234
Soffit, fascia and window trim$500$1,500$3,500
Tear-off labor (32.4 h at $68/h)$1,044$2,193$4,178
Dumpster and disposal$300$600$1,000
Sheathing repair allowance$0$0$2,160
Permit (where required)$0$250$600
Total$8,803$17,311$33,601

Vinyl siding labor costs in Texas

Labor is priced from what Texas tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 12% below the national typical of $19,571. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)Texas medianU.S. medianBilled at 3.5×
Carpenters$23.51$29.12$82/h
Construction laborers and helpers$19.53$22.66$68/h

What drives the price

What people were actually quoted in Texas

Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$22,000paidVinyl on ~1,000 sq ft homenorth Texasthread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the Texas median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does vinyl siding installation cost in Texas?

For the default job below, about $17,311 in Texas, with a range of $8,803 to $33,601 depending on equipment, access and the contractor. That is 12% below the national typical of $19,571, because Texas trade wages differ from the national median. Change the inputs to match your job.

How do I estimate my wall area?

Multiply the house perimeter by the wall height for each story, add about 15% for gables, and subtract large openings like garage doors. A 1,500 sq ft two-story house often has 1,800 to 2,400 sq ft of wall.

Vinyl or fiber cement siding?

Vinyl costs roughly half as much installed and needs no paint. Fiber cement (such as James Hardie) is heavier, more fire-resistant and looks more like wood, but costs more to install and needs repainting over time.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All Texas costs

Vinyl siding cost in other states

Sources