Home Cost Decoder

Home › Roofing and exterior › Vinyl Siding Installation Cost

Itemized estimate · 2026

Vinyl Siding Installation Cost

Vinyl siding priced by wall area: siding and trim, house wrap, installation, and removal of the old siding.

  • $19,571typical total
  • $9,879–$37,907range for this scope
  • $102/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $102/hour for a worker paid the national median of $29.12/hour.

Estimated installed cost
$19,571
Typical estimate. Range $9,879 to $37,907 for this scope.
Line itemLowTypicalHigh
Vinyl siding, J-channel, corners, starter$2,700$4,050$5,850
House wrap, fasteners, sealant$450$720$1,080
Installer labor (crew hours) (97.2 h at $102/h)$4,717$9,907$18,870
Soffit, fascia and window trim$500$1,500$3,500
Tear-off labor (32.4 h at $79/h)$1,212$2,545$4,847
Dumpster and disposal$300$600$1,000
Sheathing repair allowance$0$0$2,160
Permit (where required)$0$250$600
Total$9,879$19,571$37,907

What drives the price

What people were actually quoted

11 price reports from Reddit threads (median $33,000). Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$80,000quoteRemove wood siding and install vinyl on ~2,600 sq ft house; siding area unclearConnecticutthread
$36,000quoteReplace rotting wood/stucco siding on part of ~2,300 sq ft houseMetro Detroit, MIthread
around $80,000quoteRemove wood siding; install vinyl on ~2,600 sq ft homeConnecticutthread
$55,000quoteHome and detached garage: vinyl, gutters, soffits and window surrounds—thread
around $25,000paidCertainTeed vinyl siding only, part of full renovation—thread
$74,000quoteLowe's contractor quote; scope not fully shown in comment—thread
$33,000–$53,000quotesOther contractors' ranges for same commenter; scope not fully shown—thread
$32,000quoteRemove old siding, install vinyl on ~1,800 sq ft homeColoradothread
$22,000paidVinyl on ~1,000 sq ft homenorth Texasthread
$14,000paidVinyl on ~1,500 sq ft split-level, completed about a year before comment (paid around one year before post)—thread
$18,000quoteAlternative quote for same ~1,500 sq ft vinyl siding project (paid around one year before post)—thread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the national median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does vinyl siding installation cost?

For the default job below, about $19,571, with a range of $9,879 to $37,907 depending on equipment, access and the contractor. Change the inputs to match your job.

How do I estimate my wall area?

Multiply the house perimeter by the wall height for each story, add about 15% for gables, and subtract large openings like garage doors. A 1,500 sq ft two-story house often has 1,800 to 2,400 sq ft of wall.

Vinyl or fiber cement siding?

Vinyl costs roughly half as much installed and needs no paint. Fiber cement (such as James Hardie) is heavier, more fire-resistant and looks more like wood, but costs more to install and needs repainting over time.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight

Vinyl siding cost by state

Sources