Home Cost Decoder

Home › Plumbing › Shower Installation Cost

Itemized estimate · 2026

Shower Installation Cost

Replacing a shower in the same spot: tear-out, a new pan and walls (a kit or tile), the valve and trim, and a glass door.

  • $4,247typical total
  • $1,925–$9,169range for this scope
  • $79/hlaborer rate
Labor rate and area

Default 3.5×: a contractor bills about $79/hour for a worker paid the national median of $22.44/hour.

Estimated installed cost
$4,247
Typical estimate. Range $1,925 to $9,169 for this scope.
Line itemLowTypicalHigh
Tear-out of the old shower (5.0 h at $79/h)$168$393$898
Debris disposal$100$200$400
Shower kit: pan and wall panels$500$1,000$2,200
Installer labor: set pan and panels (8.0 h at $102/h)$364$815$1,747
Shower valve, trim and head$150$350$800
Plumber labor: valve and drain (3.0 h at $107/h)$153$322$767
Framed glass door$300$550$900
Door installation (2.0 h at $83/h)$89$167$358
Drywall patch and paint around the shower$100$300$700
Permit (where required)$0$150$400
Total$1,925$4,247$9,169

What drives the price

What people were actually quoted

10 price reports from Reddit threads (median $9,500). Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$14,000quoteShower replacement after glass door failure; detailed scope not stated—thread
$10,000quoteReplace entire shower with cracked acrylic base—thread
$500quoteLabor to replace only shower base and level floor; owner buys base—thread
about $14,000paidCommenter says charged roughly same for shower installation; exact scope unavailable—thread
$8,200quoteDemo old tile shower, solid-surface panels, one-piece pan, glass bypass door, valve/head/hand sprayer; no plumbing reconfiguration—thread
about $9,000quoteCommenter bid similar shower job including waterproofing, panels, pan, valve and glass—thread
$1,500paidCommenter says similar work completed; exact scope not fully described—thread
$2,800quoteAnother estimate for same commenter's shower work; scope not fully described—thread
$17,000quoteShower renovation; specific materials/extent partly shown in linked image—thread
$18,000paidSmall shower renovation, custom glass doors, hidden drain, Grohe fixture and wall panelNew Englandthread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the national median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does shower installation cost?

For the default job below, about $4,247, with a range of $1,925 to $9,169 depending on equipment, access and the contractor. Change the inputs to match your job.

How long does a shower replacement take?

A kit or panel shower in the same footprint usually takes one to three days. A tiled shower often takes a week or more, because the pan, waterproofing and grout each need time to cure.

Is a tile shower worth the extra cost?

Tile lets you choose any size and look and adds value in higher-end homes. Kits and panels have no grout lines to clean and go in faster and cheaper. In rentals and secondary bathrooms, panels are often the better value.

Related calculators

More: Garage door · Garage door opener · Gutters · Gutter guards · 240V outlet · Recessed lighting · French door · Sliding glass door · Exterior door · Mini split · Egress window · Metal roof · Vinyl siding · Hardie (fiber cement) siding · Paver patio · Skylight

Shower cost by state

Sources