Home Cost Decoder

Home › Roofing and exterior › Hardie Siding Installation Cost

Itemized estimate · 2026

Hardie Siding Installation Cost

Fiber cement plank siding (such as James Hardie) priced by wall area: materials, installation, paint, and tear-off.

  • $31,715typical total
  • $18,214–$58,184range for this scope
  • $102/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $102/hour for a worker paid the national median of $29.12/hour.

Estimated installed cost
$31,715
Typical estimate. Range $18,214 to $58,184 for this scope.
Line itemLowTypicalHigh
Fiber cement planks, trim boards, flashing$7,200$9,450$12,600
House wrap, fasteners, caulk$540$810$1,260
Installer labor (crew hours) (151.2 h at $102/h)$7,862$15,410$29,877
Soffit, fascia and window trim$1,000$2,500$5,000
Tear-off labor (32.4 h at $79/h)$1,212$2,545$4,847
Dumpster and disposal$400$700$1,200
Sheathing repair allowance$0$0$2,700
Permit (where required)$0$300$700
Total$18,214$31,715$58,184

What drives the price

What people were actually quoted

11 price reports from Reddit threads (median $47,000). Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
$65,000quote~2,600 sq ft pre-painted Hardie plank, remove T1-11, sheathing repairs, Tyvek, caulk; excludes fascia/soffits/guttersBay Area, CAthread
$61,000quoteHome and detached garage: Hardie, gutters, soffits and window surrounds—thread
$26,000quoteJames Hardie plus new fascia and framing; commenter location not clear—thread
around $90,000quoteReplace existing Hardie siding on one-story ~2,200 sq ft home; possible moisture barrier/rotWashingtonthread
$51,000quoteFactory-painted James Hardie with removal of T1-11, barrier and sheathing repairs; scope includes 2,600 sq ft and 28 windows—thread
$47,000quoteSame house and Hardie scope, second contractor—thread
around $55,000quoteJames Hardie siding; local firm, other scope details in thread—thread
around $45,000paidFull Hardie replacing aluminum siding, two-story house with gambrel roof; shingle-style second story (paid around two years before post)Chicago area, Illinoisthread
$32,000quoteHardie board siding; original cedar siding project, exact carpentry scope unclear—thread
$28,000quoteHardie board on ~900 sq ft ranch; sight-unseen bidsouth of Boston, Massachusettsthread
$30,000quoteHardie board on same ~900 sq ft ranch; on-site bidsouth of Boston, Massachusettsthread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the national median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does hardie (fiber cement) siding installation cost?

For the default job below, about $31,715, with a range of $18,214 to $58,184 depending on equipment, access and the contractor. Change the inputs to match your job.

Why does Hardie siding cost more than vinyl?

The planks cost more, weigh much more, must be cut with dust control, and need careful flashing and trim. Installation takes roughly 50–100% more labor than vinyl.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight

Hardie (fiber cement) siding cost by state

Sources