Home Cost Decoder

Home › Roofing and exterior › Hardie Siding Installation Cost › Washington

Washington · 2026 estimate

Hardie Siding Installation Cost in Washington

Fiber cement plank siding (such as James Hardie) priced by wall area: materials, installation, paint, and tear-off.

  • $35,752typical total
  • $20,255–$65,992range for this scope
  • $125/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $125/hour for a worker paid the Washington median of $35.67/hour.

Estimated installed cost in Washington
$35,752
Typical estimate. Range $20,255 to $65,992 for this scope.
Line itemLowTypicalHigh
Fiber cement planks, trim boards, flashing$7,200$9,450$12,600
House wrap, fasteners, caulk$540$810$1,260
Installer labor (crew hours) (151.2 h at $125/h)$9,631$18,876$36,596
Soffit, fascia and window trim$1,000$2,500$5,000
Tear-off labor (32.4 h at $96/h)$1,484$3,116$5,936
Dumpster and disposal$400$700$1,200
Sheathing repair allowance$0$0$2,700
Permit (where required)$0$300$700
Total$20,255$35,752$65,992

Hardie (fiber cement) siding labor costs in Washington

Labor is priced from what Washington tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 13% above the national typical of $31,715. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)Washington medianU.S. medianBilled at 3.5×
Carpenters$35.67$29.12$125/h
Construction laborers and helpers$27.75$22.66$96/h

What drives the price

What people were actually quoted in Washington

Self-reported quotes and bills with very different scopes, many from high-cost areas, so treat them as a reality check, not a benchmark. Posts asking "is this quote fair?" skew toward high quotes. See how they compare with our estimates.

PriceTypeWhat was includedWhere
around $90,000quoteReplace existing Hardie siding on one-story ~2,200 sq ft home; possible moisture barrier/rotWashingtonthread

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the Washington median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does hardie (fiber cement) siding installation cost in Washington?

For the default job below, about $35,752 in Washington, with a range of $20,255 to $65,992 depending on equipment, access and the contractor. That is 13% above the national typical of $31,715, because Washington trade wages differ from the national median. Change the inputs to match your job.

Why does Hardie siding cost more than vinyl?

The planks cost more, weigh much more, must be cut with dust control, and need careful flashing and trim. Installation takes roughly 50–100% more labor than vinyl.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All Washington costs

Hardie (fiber cement) siding cost in other states

Sources