Home Cost Decoder

Home › Roofing and exterior › Hardie Siding Installation Cost › Kansas

Kansas · 2026 estimate

Hardie Siding Installation Cost in Kansas

Fiber cement plank siding (such as James Hardie) priced by wall area: materials, installation, paint, and tear-off.

  • $30,676typical total
  • $17,688–$56,174range for this scope
  • $96/hcarpenter rate
Labor rate and area

Default 3.5×: a contractor bills about $96/hour for a worker paid the Kansas median of $27.39/hour.

Estimated installed cost in Kansas
$30,676
Typical estimate. Range $17,688 to $56,174 for this scope.
Line itemLowTypicalHigh
Fiber cement planks, trim boards, flashing$7,200$9,450$12,600
House wrap, fasteners, caulk$540$810$1,260
Installer labor (crew hours) (151.2 h at $96/h)$7,395$14,495$28,102
Soffit, fascia and window trim$1,000$2,500$5,000
Tear-off labor (32.4 h at $75/h)$1,153$2,421$4,612
Dumpster and disposal$400$700$1,200
Sheathing repair allowance$0$0$2,700
Permit (where required)$0$300$700
Total$17,688$30,676$56,174

Hardie (fiber cement) siding labor costs in Kansas

Labor is priced from what Kansas tradespeople are actually paid (BLS Occupational Employment and Wage Statistics, May 2025), times a 3.5× contractor billing multiple. That puts the typical job 3% below the national typical of $31,715. Equipment and materials are priced the same everywhere; local supply prices and permit fees can move the total further. Big metros usually cost more than rural parts of the state: use the labor pricing setting above to adjust.

Trade (BLS)Kansas medianU.S. medianBilled at 3.5×
Carpenters$27.39$29.12$96/h
Construction laborers and helpers$21.56$22.66$75/h

What drives the price

No Kansas price reports in our Reddit sample yet. See 11 reports from other places.

How this estimate is built

Equipment and material lines use typical retail prices for the item, checked against current listings. Labor is hours for this scope (our estimate, shown in each line) times a billed hourly rate: the Kansas median wage for the trade from the U.S. Bureau of Labor Statistics, times 3.5 to cover what a contractor pays on top of wages (payroll taxes, insurance, vehicle, licensing, unbilled time) and profit. The low and high columns use cheaper or pricier equipment, fewer or more hours, and billing multiples of 2.5× and 5×. More on the method.

Questions

How much does hardie (fiber cement) siding installation cost in Kansas?

For the default job below, about $30,676 in Kansas, with a range of $17,688 to $56,174 depending on equipment, access and the contractor. That is 3% below the national typical of $31,715, because Kansas trade wages differ from the national median. Change the inputs to match your job.

Why does Hardie siding cost more than vinyl?

The planks cost more, weigh much more, must be cut with dust control, and need careful flashing and trim. Installation takes roughly 50–100% more labor than vinyl.

Related calculators

More: Water softener · Garage door · Garage door opener · Toilet · Sump pump · Garbage disposal · 240V outlet · Recessed lighting · Shower · Bathtub · French door · Sliding glass door · Exterior door · Mini split · Egress window · Skylight · All Kansas costs

Hardie (fiber cement) siding cost in other states

Sources